If your return is accepted, we’ll send you instructions on how and where to send your package. To start a return, you can contact us at visit our store. If the material returned has any visible damage, we cannot issue a refund. You’ll also need the receipt or proof of purchase. To be eligible for a return, your item must be in the same condition that you received it. ![]() Any custom items or items we do not keep in stock cannot be returned. All approved returns on items we keep in stock are subject to a 15% restock fee, minimum $30. All shipping errors must be reported within 48 hours of receipt of material. If you require further technical information regarding this product please contact your retailer/salesman. egress, safety glass near doorways, etc.). It is the sole responsibility of the purchaser/installer to be sure that the intended use of this product complies with any and all applicable buildings codes (i.e. Due to this and other factors, we reserve the right to change specifications without notice. Individual products may be subject to a variation in performance. NOTE: MI WINDOWS AND DOORS' designs and manufacturing methods are continually being improved. Installer should make final adjustments to ensure proper sash operation and window performance. Manufacturer’s recommended installation procedures are to be used. Frame must be installed straight, plumb and level, without twisting, bowing or springing. They are not intended to prevent people or objects from exiting the window or to provide security against forced entry.) ( NOTE: Insect screens are intended only to provide reasonable insect control. Screens shall meet ANSI/SMA standard 1004-87. Screen cloth to be made from 18x16 fiberglass mesh and held securely by flexible, vinyl spline. Screen to be made from roll-formed aluminum, 5/16” x 3/4” with a. All screws, clips, and other fasteners shall be made of non-corrosive materials compatible with reinforcements. One plastic tilt latch shall be used at each end of the sash top rail. Two sweep lock keepers to be fastened to the fixed meeting rail. Two metal camtype sweep locks to be located equidistant from each end of the top sash rail. Moveable sash balance mechanism to consist of stainless steel constant force springs. Bottom of moveable sash fixed meeting rail to contain one foam bulb. Sill insert shall have one strip of center fin weatherstripping. Movable sash shall have double strips of center fin weatherstripping on each stile and one on the top rail. Note: 7/8” thick insulated glass used on select configurations. ![]() Glass to be held securely in place with silicone and with rigid, extruded, vinyl, interior glazing beads. Moveable sash glass panel shall consist of 3/4” thick insulated glass. Note: 7/8” thick insulated glass used on select configurations. Low-E glass, argon gas and other glazing options available. Fixed (top) glass to be held securely in place by the use of a single-sided adhesive foam tape at the exterior and a rigid PVC glazing bead, which has a minimum wall thickness of. Top, or fixed, glass panel shall consist of 3/4” thick insulated glass. Inside joint between sill snap-in and main frame to be sealed. Sill insert to be sealed with double-sided foam tape before insertion. It shall “snap fit” into the main frame sill. Shall be made from rigid PVC with a wall thickness of. Bottom of meeting rail to have foam bulb to seal against the moveable sash. Meeting rail to have metal reinforcement. Meeting rail shall be secured to the main frame with three screw fasteners through injection molded end caps attached to the meeting rail with three screws. Shall be made from a rigid PVC hollow extrusion with a. Sash to have metal reinforcement in horizontal members. Sash to be of welded corner construction. Shall be made from rigid polyvinylchloride (PVC) extrusions which have a minimum wall thickness of. Main frame shall be welded together at the corners. Shall be made from rigid polyvinylchloride (PVC) multi-hollow extrusions which have a minimum wall thickness of. Continuous Head and Sill Mulling for Twins (Double Door – 6068).Steel reinforcement at meeting rail and sash horizontal. ![]() Easy sash and fixed glass removal for drywall pass through (up to 3/4 width).A closer look reveals details like a full-length lift rail and metal reinforcements at the meeting rails. With standard features that include a pre-punched mounting fin and easily removable sash, the 3500 window is designed for builders. Our high quality 3500 vinyl single-hung windows are durable and energy efficient
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |